Crosswall construction
Cross-wall construction is a form of construction in which load bearing walls provide the primary vertical support and lateral stability for precast floors. External wall panels, lift cores or staircases are used to provide the required longitudinal stability. Bridging components such as floors, roofs and beams are supported by the load bearing walls or façade wall.
If both walls and floors are of cast in situ reinforced concrete, the series of ‘boxes’ so formed is sometimes referred to as ‘box frame construction’.
The system is ideal for buildings with cellular and orthogonal grids, with rooms of up to 4 x 9 m. It is suitable for buildings up to a height of five storeys where the floors are similar and where internal separating or party walls are required, such as in blocks of flats and student accommodation.
It creates a structurally efficient building with high levels of acoustic and fire separation between adjacent rooms. This is due to the high mass of the structure and good airtightness. Cross wall construction also has good thermal mass.
Cross-wall systems can offer significant time and cost savings in comparison to traditional building techniques as the components can often be prefabricated. In addition, the arrangement of windows between crosswalls is unrestricted.
The precast elements are typically brought to site 'just in time'. Hidden joints and ties, both horizontally and vertically are grouted in place as the work develops. Other works such as installation of mechanical and electrical services and finishes that are required can start prior to the completion of the entire structure.
Cross-wall construction involves a number of key connections:
- Wall-to-wall at vertical joints.
- Wall-to-wall at horizontal joints.
- Wall-to-base/foundation.
Care must be taken in both design and construction to ensure that the junctions between the non-load bearing claddings and the crosswalls are weather resistant.
If a pitched roof is to be included with the ridge parallel to the lateral axis, there will need to be an edge beam to provide a seating for the rafters and to transmit roof loads to the crosswalls.
[edit] Related articles on Designing Buildings Wiki
- Cavity wall.
- Cladding.
- Concrete frame.
- Diaphragm wall.
- Modular buildings.
- Offsite manufacturing.
- Off-site prefabrication of buildings: A guide to connection choices.
- Party wall.
- Precast flat panel system.
- Prefabricated structural panels.
- Prefabrication.
- Preventing wall collapse.
- Wall types.
[edit] External resources
- ‘Building Construction Handbook’ (6th ed.), CHUDLEY, R., GREENO, R., Butterworth-Heinemann (2006)
Featured articles and news
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.
Comments
Hi my house is of this design, I want to remove a timber and plasterboard partitionwall in my kitchen and make it bigger but am worried if it’s load bearing as it is pretty much the only interior wall downstairs of the house? Any help appreciated thanks in advance.
nick
If you're not certain, you should get a structural engineer to check it out for you. It should be relatively quick and straight forward job for them.